Double suspension clamps

Double suspension clamp is a device used to fix and suspend objects, usually consisting of two clamps, which can be used in various scenarios. The following is its related introduction:

Structure and Principle

Structure: Generally composed of two U-shaped clamps, fixing screws, excellent hexagonal nuts, etc. Some may also have components such as suspension wire mechanisms, such as connecting wires through suspension wire frames and suspension wire holes. In the double hoop device used for the construction of high column cover beams and tie beams, both the upper and lower hoops consist of two steel hoops. The steel hoops are equipped with vertical connection plates at both ends, which are installed on the columns by tightening bolts. The vertical connection plates are also equipped with horizontal connection plates at both ends.

Principle: Use two clamps to hold the fixed object (such as a utility pole, column, etc.). By adjusting the fixing screw and hex nut, the distance between the two clamps can be adjusted according to the diameter of the object, thus firmly fixing it on objects of different diameters, providing stable support and suspension points.

Application scenarios

Communication industry: used as installation points for tension and suspension clamps when installing ADSS optical cables on pole lines, and can also be used to fix communication clamps and other equipment.

Bridge construction: In the cast-in-place construction of high column cover beams and tie beams, as part of the double hoop device, it is used in conjunction with wedge-shaped unloading devices to support the formwork of the cast cover beams and tie beams, withstand vertical forces and horizontal thrust, and improve the safety of construction. In the construction of the cover beam, a double hoop integral lifting structure can also be used, which is convenient for construction and has good efficiency.

advantage

Strong adaptability: able to adjust the spacing according to different installation object diameters, suitable for various specifications of utility poles, columns, etc.

Easy installation: Installation and fastening are carried out through bolts and other connecting components, with relatively simple operation, making it convenient for construction personnel to install and dismantle on site.

Good stability: The design of two clamps can provide a stable fixing effect, which can evenly distribute the load when subjected to tension or pressure, confirming the stability of the fixed object.